POLY-SEAL 111 is  an emulsion based on polymeric resins, mineral charges, pigments and special additives.used as a surface treatment.

General description:

POLY-SEAL 111 is  an emulsion based on polymeric resins, mineral charges, pigments and special additives.used as a surface treatment.

 

Advantages:

  • Extends the service life and reduces maintenance costs of asphalt.
  • Protects pavements from destructive effects of water,sunlight and oxidation.
  • Provides a distinctive, new-looking surface that is skid resistant, long lasting and easy to clean.
  • Hardened surface is of high abrasion resistance.

 

Uses: 

For industrial site parking areas,refinery depots,service stations, airfields,apron in airports andmotor ways.

 

Technical  Characteristics:

  • Drying Time:“set to touch” in 1 hour, exhibit “final set” in 6 hours.
  • Non-Flammability: The cured coating shows no tendency to flash or ignite.
  • Resistance to Kerosene: The cured coating exhibits no penetration or loss of adhesion after 24 hour immersion.
  • Adhesion & Resistance to Water: The cured coating exhibits no penetration, blistering, loss of adhesion, nor tendency to re-emulsify after immersion for 24 hours.

 

Application method:

  • Asphalt surface must be structurally sound, surface cured, and free from all loose or foreign matter prior to the application of POLY-SEAL111.
  • POLY-SEAL111 can be applied by spray, rubber-bladed squeegee, brush, or mechanical equipment specifically designed for this purpose.
  • For tougher surface add  40 - 50 Kg of pure silica sand to every 100 Kg of POLY-SEAL111.
  • POLY-SEAL111 is usually appliead in two coats.the first coat is diluted at 1 : 1 water ratio,while the second coat require no dilution.
  • Application rate recommended to be 1.0 - 1.5 kg of mix per coat depending on the surface.  

 

Specification:

              Texture & Color    Doughy, black

              Density@ 20°C    1.10 - 1.350 gr/cm3

               Flash point           Not inflammable 

 

Storage:

Sheltering from weather and freezing temperatures in tightly sealed drums recommended. 

 

 Packing:

15 Kg pails.

100 Kg Steel drums.