Downloads:
Download this file (Shocoat-En.pdf)Shocoat Datasheet

 SHOCOAT - is a viscous bitumen emulsion. shocoat dries to a black, tough, flexible waterproof coating which is also resistant to the passage of vapour.


DESCRIPTION:

SHOCOAT - is a viscous bitumen emulsion. shocoat dries to a black, tough, flexible waterproof coating which is also resistant to the passage of vapour.

 

USES:

  • As a damp-proof membrane.
  • As a vapor seal for the hair cracks of concrete/ wood surfaces.
  • For protection of below ground concrete from salt attack.
  • As a general purposes waterproofing material.
  • As surface dressing, curing compound for concrete as water retention.

 

ADVANTAGES:

Application: Can be used for high build application

Easy to apply: Product is used without heating.

Low cost: Water based

Chemical resistant: Resists attack by chloride and sulphate ions present in ground water.

Versatile: Adhere to a wide range of materials including concrete, metal, wood, cork and most insulating  boards.

Safe:  Product is non-flammable

 

STANDARDS:

SHOCOAT  is manufactured according to ASTM D1227.

 

Properties

SHOCOAT L

SHOCOAT M

SHOCOAT H

 

Appearance

Brown / Black Liquid

 

Solid Content %

40 %

45 %

50 - 55 %

 

Coverage Rate

From 3 - 4 m² per one coat without dilution depending on the nature of surface.

 

Specific Gravity

1.02 ± 0.02 for each kg / Liter.

Dilution(if required )

From 5 - 10 % depending on the surface

Final Drying Time@25C°

2 Hours

2 Hours

1 Hour

 

PRECAUTIONS

SHOCOAT  should be well stirred before use.

SURFACE PREPARATION

Surface to be treated must be sound, clean and free of oil or grease. Any oil or grease contamination may be removed with degreaser. If the surface is dusty, it may be primed with a coat of SHOCOAT diluted with an equal quantity of cool, clean water and allow to dry.

 

APPLICATION

SHOCOAT may be applied by brush or roller. It is recommended that required one or two coats should be applied, depending on degree of protection. 

 

CLEANING

SHOCOAT  may be removed from tools and equipment with water when it is wet, on drying may be removed with a thinner.

 

STORAGE

Shelf life is at least 12 months under temperature from 5-60 Co in covered or unopened areas away from direct sources of heat or naked flame.

 

HEALTH AND SAFETY

- Wear protective cloths, gloves, glasses and face protection.

- For skin contact, remove it with suitable cream and followed by soap and water cleaning.

- For eye contact rinse with plenty clean water and then seek medical advice.

- For more details, Ask for safety data sheet for the product.

 

PACKAGING:

18  Kg Steel pails.

200Kg Steel drums.

1000 Kg Plastic Bulk